Denon DHT-M330DV Instrucciones De Operación página 21

(4) TV and video deck preset memories
• Components of other brands can be operated with the included
remote control unit by storing their codes in the preset memory.
Note that depending on the model some operations may not be
possible and some buttons may not operate properly.
3
4
4
1
2 Not set upon shipment from the factory.
1 Set mode switch 1 to the "DVD" position.
2 Set mode switch 2 to the "TV/VCR" position.
3 Press the power ON button and the OFF button simultaneously.
• The transmission LED (indicator) flashes.
4
3
4
2
NOTES:
• When buttons are pressed while setting the preset memory,
their signals are sent from the remote control transmitter, so
cover the remote control sensor when setting the preset
memory to prevent accidental operation.
• Depending on the model and year of make, some of the remote control
codes for the brands included on the tables may not operate properly.
• For some brands there are multiple types of remote control codes. If
an operation does not work, try changing to one of the other codes.
Press the TV button to preset a TV, the VCR button to preset
a video deck, then input the 3-digit number corresponding to
the brand of the component whose signals are to be stored in
the preset memory (refer to the tables of remote control
codes on pages 22 to 25).
ENGLISH
21