Float; Clip Connection; Shutting Down; Maintenance And Care - Kärcher NT 48/1 Manual Del Usuario

Note
The cartridge filter remains installed in the
machine.
è Plug in the mains plug.
è Turn the appliance on and put it into ope-
ration.
è Drain off dirty water through the drainage
hose.
6
The suction canal (6) is equipped with a

float.

– When the dirt water reaches the highest
permissible level in the container, the
suction power is interrupted.
10 English
Float
è Turn off the appliance.
è Empty the container

Clip connection

The suction hose is equipped with a clip sy-
stem. All C-35/C-DN-35 accessories can be
connected.

Shutting down

è Empty the dirt container.
è Vacuum and wipe the appliance inside
and outside.
è Place the appliance in a dry room and
secure it from unauthorized use.

Maintenance and care

Warning
First remove the mains plug before doing
any job on the vacuum cleaner.

Change cartridge filter

è Unlock the suction basket.
180°
1
3