Replacing A Fuse - Tripp-Lite N785-CH12 Manual Del Propietário

Replacing a Fuse

The N785-CH75W-AC power supply requires a fuse glass tube to function. One fuse is preinstalled in the power supply.
One spare fuse is included in the slot next to the active fuse, and a third fuse is included in the unit packaging. If the
power supply stops functioning due to a blown fuse, the following steps can be taken to replace it:
1. Using a flathead screwdriver, open the fuse located in between the power plug and the power switch.
Installed Fuse Glass Tube x 1
2. Remove the fuse and replace with one of the spare fuses.
Replaced Fuse Glass Tube
Spare Fuse Glass Tube x 1
3. Insert the fuse back into the slot.
10