Continuous Drainage - Toyotomi TD-C200 Manual De Instrucciones

CONTINUOUS DRAINAGE

Continuous Drainage Under Good Condition
1) Ready to drain out the water using PVC hose (inside dia.13mm).
2) Take out the water tank and use tool to open the closed hole at the back of the
machine to put in the hose.
3) Put in the PVC hose into the back of the closed hole, then connect the PVC hose
to the front.
4) Put the water tank back, do according to the instructed way.
The Proper Way To Place The Water Drainage PVC Hose
When using continuous drainage, the PVC hose most be placed below the drainage
hole. Most avoid uneven ground and over folded hose.
All manuals and user guides at all-guides.com
Continuous drainage hole
-5-
ENGLISH