Start-Up And Use; Switching On And Operating The Hob; Switching Off The Hob; Safety Devices - SCHOLTES TEPPAN YAKI F Manual De Instrucciones

Start-up and use

! The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.

Switching on and operating the hob

1. Turn the ON/OFF knob towards the right, until it
reaches the position.
2. Adjust the temperature to the desired value using
the TEMPERATURE ADJUSTMENT knob.
3. This will switch on the hotplate and the
corresponding ON/OFF and TEMPERATURE
indicator lights.
4. When the TEMPERATURE indicator light
switches off, this means that the set temperature
has been reached.
5. A thermostat ensures the temperature remains
constant, at the set level. During the subsequent
heating phase, the TEMPERATURE indicator light
switches on again.

Switching off the hob

To switch off the appliance, turn the ON/OFF in an
anti-clockwise direction, from the
"O" position.

Safety devices

Heat indicators
If, after the appliance has been used, the
RESIDUAL HEAT indicator light remains lit, this
means that the heating zone is still hot (temperature
over 60°C); do not touch it. The indicator light will
switch off once the hotplate has cooled down.
All manuals and user guides at all-guides.com

Technical description of the models

Cooking zone
Total power

Practical advice on using the appliance

Food may be prepared directly on the surface of the
hob, with or without the use of fat or oil.
! The surface of the hob may be marked by the
palette knife; however, this will not affect its
performance.
position to the
Hobs TEPPAN YAKI F
TEPPAN YAKI SF
Power (W)
During cooking, the palette
knife (supplied with the
appliance) may be used to
turn/flip food.
GB
2000
13