Klarstein WONDERSKY Manual Del Usuario página 21

Calefacción por infrarrojos de techo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

If the power cord is damaged, it must be replaced by the manufacturer,
customer service or a similarly qualified person in order to avoid a hazard.
The surface of the heater can reach a surface temperature of up to 110-120 °C.
Keep it out of the reach of children and vulnerable persons.
Keep babies and children away from all packaging materials such as plastic
bags to avoid choking hazards.
WARNING
Do not use this heater in small rooms if there are people inside
who are not able to leave the room independently, unless
permanent supervision is provided.
Electrical safety
Before installation, repair or maintenance, the heater must be switched off
and disconnected from the power supply. Before installation, check that the
heater is undamaged.
If the heater or the power cord are damaged in any way, do not continue to
use the heater. Repairs, maintenance or modifications to the unit must only be
carried out by an authorised specialist company.
Never attempt to repair the heater yourself as this will invalidate the warranty.
Do not operate the heater if it has been dropped, but rather contact the
manufacturer or customer service to ensure that it is not damaged.
This heater is designed for operation with 230 V, 50 Hz AC. If your mains
supply does not match this, you must not use the heater.
This heater is not suitable for use in the UK or other countries where a mains
voltage of 240 V or higher prevails.
The heater must not be placed directly under a power socket.
EN
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10038378100383791003838010038381

Tabla de contenido