Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
28
Modes
The thermostat has 2 different operating modes. Press the M button to select
between mode 1 and mode 2. Mode 1 is the manual mode and mode 2 is the
heating programme mode.
1.
You can set the heating programme mode separately for each day. If you want
to change the setting, press and hold the M button for 5 seconds until "W1"
flashes on the screen.
2.
Select the date you want to save with the + and - buttons. Press the M button
to confirm.
3.
Then set the start time of the first period. Confirm by pressing the M button.
4.
Now set the desired room temperature by pressing the + and - buttons. Press
the M button again to confirm.
5.
The setting for the next period can now be made. Repeat steps 2-4 for this.
For faster programming, you can create a table similar to the one below, which
you can then use to make the desired settings:
Weekday (W1/W2/W3/W4/W5/W6/W7)
Period
Time
06:30
Temperature
21 °C
Lighting
Press the light button to switch on the light at the back of the heater. Press this
button again to turn the lighting on/off. Press the light button once more to
change the light colour (cold white or warm white).
Child safety lock
Press the M and SET buttons simultaneously to activate or deactivate the child
lock.
Open window detection
This thermostat is equipped with a function that detects open windows. If the unit
detects that the room temperature has dropped drastically within a short time
while the heater is running in heating mode, it will indicate that a window is open.
The heater will switch off automatically for 30 minutes and the window symbol
will flash on the screen. After 30 minutes, the unit automatically returns to the
previous setting.
1
2
08:00
18 °C
3
4
18:00
22:30
21 °C
16 °C
Publicidad
Capítulos
Tabla de contenido
