Kohler K-2367 Guia De Instalacion página 3

Drain Body
Foam Gasket
(supplied with lavatory)
Roll the O-ring onto the
drain body and seat into the
underside of the lavatory.
Washer
1. Install the Lavatory
CAUTION: Risk of product damage. Do not overtighten
connections.
Drill a 1-5/8" (4.1 cm) hole, at the desired installation location.
Install the drain.
Discard the gasket supplied with the drain.
Slide the foam gasket onto the drain body.
Roll the O-ring onto the drain body. Seat the O-ring into the
underside of the lavatory.
Place the washer over the drain body and secure with the nut. Do
not overtighten.
Kohler Co.
O-Ring
(supplied with lavatory)
1-5/8" (4.1 cm)
Drain Hole
Nut Discard gasket
supplied with the drain.
3 1066948-2-B