Installation; Assemble The Speakers; Speaker Setup; Wall Mounting - Pioneer HTZ-421DVD Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

16

Installation

3
Installation

Assemble the speakers

Speaker Setup

3
1. Connect the wires to the player.
Insert the cables connected to the
player to the same colored connector
on the speaker.
CAUTION
• These speaker terminals carry HAZARDOUS
LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord before touching any uninsulated parts.
• Do not connect any speakers other than
those supplied to this system.
• Do not connect the supplied speakers to
any amplifier other than the one supplied
with this system. Connection to any other
amplifier may result in malfunction or fire.
2. Attach the non-skid pads to the base of
each speaker.

Wall mounting

All speakers have a mounting hole which
can be used to mount the speaker on the
wall.
Before mounting
Remember that the speaker system is
heavy and that its weight could cause the
screws to work loose, or the wall material
to fail to support it, resulting in the speaker
falling. Make sure that the wall you intend
to mount the speakers on is strong enough
to support them. Do not mount on plywood
or soft surface walls.
Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
CAUTION
• If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
• Pioneer is not responsible for any accidents
or damage that result from improper
installation.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Htz-221dvd

Tabla de contenido