Connections To Your Tv; Component Video Connection - Pioneer HTZ-421DVD Manual De Instrucciones

Connections to Your
TV
Make one of the following connections,
depending on the capabilities of your
existing equipment.
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the player. Use only one
of the connections described in this manual.
• Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
CAUTION
• Make sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
• Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.

Component Video Connection

Connect the COMPONENT VIDEO
(PROGRESSIVE SCAN) OUTPUT jacks on
the unit to the corresponding input jacks
on the TV using Y Pb Pr cables.
You can hear the sound through the
system's speakers.
Component Video Connection
NOTE
If your TV accepts progressive format
signals, you can use this connection and set
[Component Out] in [Video Output Settings]
setup to [Progressive] (See page 24).
Installation 19
3