Warm Through - Fri-Jado Bake Basic 3 - E Instrucciones De Manejo

1. Clean the inside, the removable parts and the accessories thoroughly with soapsuds before putting
the unit into use.
2. After cleaning, wipe the unit with a cloth moistened with clean water to remove soapsuds residues
and then dry the entire unit.
3. Place the beams for the baking trays.
4. Insert the plug into the socket.
3.3.

Warm through

Warm through the unit to remove the metal odour. The warming through takes place by heating the oven at
250 °C for 30 minutes. Before warming through, remove all materials from the oven except for the beams for
the baking trays and the baking trays and/or shelves.
Warm through the Bake Basic
Action
1 Switch on the oven
2 Set the time to 30 minutes
3 Select the temperature
4 Set the temperature to 250 °C
5 Start the preheating
6 After having finished the
preheating, the oven will give a
sound signal and Load appears
on the display
Start the heating-through process
7 After having finished the heating
through, the oven will give a sound
signal and End appears on the
display
8 Switch off the oven
Follow the procedure below when storing a unit that will not be used for some time:
• Thoroughly clean the unit.
• Package the unit dustproof.
•
Store the unit in a dry place.
Bake Basic 3/5 - E & P
Operation
/
/
en / 2-9
Display (after operation)
Last set baking time
_ 30
Last set temperature
_250
The set baking time
The set baking time expires
Last set baking time
9123573_1007