Operation Of Bake Basic - P; Manual Operation - Fri-Jado Bake Basic 3 - E Instrucciones De Manejo

Bake Basic 3/5 - E & P
4.3.2. View and change the temperature while baking
You can view and change the temperature while baking.
During baking, press the button
set temperature using the
4.3.3. View and change the baking time while baking
You can view and change the baking time while baking.
During baking, press the button
change the set remaining baking time using the
4.3.4. Stop during the baking process
After pre-heating, you can interrupt the baking process at all times by pressing the
4.4.

Operation of Bake Basic - P

WARNING
Never touch the interior of the oven when it is hot without protecting your hands. Use oven
gloves.
The Bake Basic 3-P and the Bake Basic 5-P can be operated both manually and automatically.
4.4.1.

Manual operation

Action
1 Switch on the oven
2 Set the required baking time
3 Select set temperature
4 Set the required temperature
5 Start the preheating
6 After the preheating has expired, the
oven will give a sound signal and
Load will flash on the display
7 Steam can be supplied while baking
8 After the baking time has expired, the
oven will give a sound signal and
End appears on the display
9 Switch off the oven or go to step 2
• The LED above the
user.
• For example, while pre-heating, loading and recipe processing.
•
Pressing the
•
The oven will then immediately proceed with baking the products.
9123573_1007
to make the set temperature appear on the display. You can change the
and buttons.
to make the remaining baking time appear on the display. You can
and
Operation
Now put the products
into the oven.
Take the products out
of the oven or press
button will flash while the oven is busy with a process started by the
button while pre-heating will abort the pre-heating.
en / 2-12
buttons.
Display (after operation)
The last set baking time appears
/
Required baking time
Last used temperature
/ Required temperature
PREh and the LED above
flashing
Load, (flashing) The temperature
is not maintained while loading the
products.
stea (flashing) Steam supply
remains active until the button is
released (max. 8 minutes).
Last set baking time
button.
is