Environmental Considerations; If Something Does Not Work - Teka IR 8400 Instrucciones Para La Instalación Y Recomendaciones De Uso Y Mantenimiento

EN
TEKA INDUSTRIAL S.A. reserves the
right to make changes to its manuals
that it deems necessary or useful, wi-
thout affecting the product's essential
features.
Environmental
considerations
The symbol on the product or
its packaging means that this
product cannot be treated like or-
dinary household waste. This pro-
duct must be taken to a recycling
collection point for electrical and
electronic appliances. By ensuring
that this product is disposed of
correctly, you will avoid harming
the environment and public health,
which could happen if this product
is not handled properly. For more
d e t a i l e d i n f o r m a t i o n a b o u t
recycling this product, please con-
tact your local authority, household
waste service or the store where
you purchased the product.
The packaging materials used are
environmentally-friendly and can be
recycled completely. Plastic com-
ponents are marked >PE<, >LD<,
>EPS<, etc. Dispose of packaging
materials, like household waste, in
your local container.
Fulfillment with Energy Efficiency
of the appliance: Appliance has
been tested according to standard
EN 60350-2 and the obtained value,
in Wh/Kg, is available in the applian-
ce's rating plate.
If something does not
work
Before calling the technical service,
perform the verifications described
below.
The appliance does not work:
Ensure that the power cable is plug-
ged in.
The induction zones do not pro-
duce heat:
The container is not appropriate (it
does not have a ferromagnetic bottom
26
or is too small). Check that the bottom
of the container attracts a magnet, or
use a larger container.
A humming is heard when starting
to cook in the induction zones:
With containers which are not very
thick or not of one piece, the humming
results from the transmission of energy
directly to the bottom of the container.
The humming is not a defect, but if
you wish to avoid it anyway, reduce
the power level slightly or use a con-
tainer with a thicker bottom, and/or of
one piece.
The touch control does not light up
or, despite lighting, does not re-
spond:
No heating zone has been selected.
Be sure to select a heating zone before
operating it. There is humidity on the
sensors, and/or your fingers are wet.
Keep the touch control surface and/
or your fingers clean and dry. The
locking function is activated. Unlock
the controls.
The sound of a fan is heard while
cooking, which continues even
after cooking has ended:
The induction zones have a fan to
keep the electronics cool
operates when the electronic circuits
get hot. It stops again when the circuits
cool whether the hob is turned on or
not.
The symbol will appear on the
power indicator of a hotplate:
The induction system does not find a
pot or pan on a hotplate or it is of an
unsuited type.
The hotplate will switch off and the
message C81 or C82 will appear on
the indicators:
Excessive temperature in the electro-
nics or on the glass. Wait for a while
for the electronics to cool down or
remove the pot or pan so that the
glass can cool.
C85 appears on the indicator of one
of the hotplates:
The pot or pan used is of an unsuited
type. Switch off the hob, switch it on
again and try with another pot or pan.
This only