Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
you can disconnect it at any time by
touching the touch button
if it has been locked (lock function
activated). The touch button
always has priority to disconnect the
touch control.
ACTIVATING HOT PLATES
Once the touch control has been
activated with touch key
desired hotplates can be switched on.
1 Select the desired hotplate by
pressing the related touch key (4).
An 0 will appear in the related power
indicator and the decimal point will
stay on indicating that the hotplate
is selected.
2 Using the touch slider key select
a cooking level between 0 and 9.
The hotplate will then be activated.
Only one hotplate can be selected at a
time, in other words only one decimal
point will be lit up (9) (except when
more than one hotplate is being
timed).
For quick switch-on at maximum
power: press the "+" touch key of the
touch slider key for at least 2 seconds.
SWITCHING OFF THE HOTPLATE
1 The hotplate must previously be
selected. Its decimal point (9) must
be lit up.
2 Using the touch slider key (6) lower
the power to level 0. The hotplate
will switch off.
For quick switch-off: at any power
level, by pressing the "-" touch key
(1), even
of the touch slider key for at least 2
seconds, the hotplate will be set to
level 0.
(1)
When a hot plate is switched off an H
will appear in its power indicator, if the
glass surface of the related cooking
area is hot and there is a risk of burns.
When the temperature drops, the
indicator switches off (if the hob is
(1), the
disconnected), or otherwise a "-" will
light up if the hob is still connected.
SWITCHING OFF THE DEVICE
The device can be switched off at any
time by pressing the general on/off
touch key
H will appear in the areas that are hot.
The indicators for the rest of the
hotplates will not light up.
The switching off of the device or of
each individual hotplate will be accom-
panied by a longer beep than the rest.
After use, disconnect the de-
vice by using its control and do not
rely on the pot/pan detector..
Locking of the touch
keys of the induction hob
Using the clock/lock touch key
you can lock all the touch keys on the
touch control panel. This will prevent
children playing with the panel or keys
from other wise accidentally being
pressed.
Bear in mind that when the touch
control is on, you can still switch it on/
off using touch key
lock function is activated (pilot light 10
(1). In standby mode an
(8)
(1) even if the
is on). On the other hand, if the touch
control is switched off, the locking
function does not allow the on/off touch
key
(1). to be used. You must first
deactivate the lock.
To activate or deactivate the function,
keep touch key
(8) pressed for
more than 2 seconds. When the
function is activated, the pilot light
(10) lights up.
Power Function (Power
concentration)
This function allows the hot plate to
be given extra power, in excess of
its nominal power. The said power
depends on the size of the hot plate
and it can reach the maximum value
allowed by the generator.
POWER BOOST FUNCTION
CONNECTION
1 Activate the related hotplate to
power level 9
2 From power level 9 press the "+"
of the touch slider key (6) and the
indicator will display the P symbol.
The Power boost function has a maxi-
mum duration of 10 minutes. After this
time has elapsed, the power level will
automatically reset to level 9.
On activating the Power boost function
in one hotplate, it is possible that the
performance of some of the others
may be affected, reducing its power to
a lower level, in which case this will be
displayed on its indicator (3).
POWER BOOST FUNCTION DI-
SCONNECTION
The Power function can be deacti-
vated
by pressing the touch key slider (6)
to go back to level 9.
The function may also automatically
be disconnected if the temperature of
the cooking area becomes too high.
Timer function
This function makes it easier to cook,
as you do not need to be present
throughout the process: the timed hot
EN
23
Publicidad
Tabla de contenido
