General Warnings; Symbols; Intended Use - Myray RX DC Instrucciones De Uso

1. GENERAL WARNINGS

These instructions explain how to correctly use the myray RX DC - RX DC/I X-ray device. Please carefully read this
manual before using the device.
NOTE: This manual does not specify the rules and regulations for acquiring, possessing or using a source
of ionizing radiation as each country has its own laws. Only the most common ones shall be mentioned and
this means that it is the user's responsibility to check local standards and observe the relevant laws.
The contents of this publication are valuable trade secrets and must not be given to third parties, stored, copied,
reproduced, disclosed or transferred in any manner (via computer, photocopies, translations or other means) without
the prior written consent of the manufacturer.
Cefla S.C. - Imola (Italy) has a company policy of continual development. Although every effort is made to keep
technical documentation up-to-date at all times some of the instructions, specifications and figures given in this
manual may slightly differ from the purchased product. The manufacturer reserves the right to make changes to this
manual without giving prior notice.
The original text is in Italian.

1.1. SYMBOLS

Type of protection against direct and indirect contact: Class I Level of protection against direct and
indirect contact: TYPE B.
WARNING! Failure to observe may result in equipment damage or injury to the user and/or patient.
NOTE: Indicates information that is especially important for the user and/or assistant.
Earth ground.
Alternating current.
On.
Off.
Ionizing radiations.
Equipment in compliance with essential requirements of directive 93/42/EEC and subsequent
changes.
Equipment abides by the essential requirements established by USA and Canada.
Disposal symbol in accordance with Directives 2002/95/EC and 2003/108/ EC.
FCC ID
F.C.C. mark (Federal Communication Commission).

1.2. INTENDED USE

This x-ray unit is designed for use in the dental surgery to make endo-oral x-rays for diagnostic purposes.
This equipment can be used to produce traditional x-rays developed using chemicals or, alternatively, it can be used
with digital x-ray sensors.
EN OPERATOR'S MANUAL
57