TECshow MADBOX PLUS Manual De Usuario página 7

SOUD - Sound Active mode.
1. Press the MENU button until "SOUD" is dis-
played, press ENTER.
2. The display will show either "ON" or "OFF".
Press the UP or DOWN buttons to select "ON" to
activate sound active mode, or "OFF" to deacti-
vate sound active mode.
3. Press ENTER, then press and hold the MENU
button for at least 3 seconds to activate.
SENS - In this mode you can adjust the sound
sensitivity.
1. Press the MENU button until "SENS" is dis-
played, press ENTER.
2. A number between 0-100 will be displayed.
Press the UP or DOWN buttons to adjust the
sound sensitivity. 0 being the least sensitive,
and 100 being the most sensitive.
3. When you have found your desired setting press
ENTER to confirm.
BLND - Standby mode
1. Press the MENU button until "BLND" is dis-
played, press ENTER.
2. The display will show either "YES" or "NO".
Press the UP or DOWN buttons to select "YES"
enter to standby mode.
3. Press ENTER. and then press and hold the
MENU button for at least three seconds to
confirm.
LED - With this function the display back light
will turn off after 2 minutes.
1. Press the MENU button until "LED" is displayed,
press ENTER.
2. The display will show either "ON" or "OFF".
Press the UP or DOWN buttons to select "ON" to
keep the LED display on at all times, or "OFF" to
switch to have the LED display switch off after 2
minutes.
3. Press ENTER. and then press and hold the
MENU button for at least three seconds to
confirm.
DISP - This function will reverse the display 180º.
1. Press the either the MENU button until "DISP" is
displayed, press ENTER.
2. Press the UP button to select "YES" to reverse
the display
3. Press ENTER to confirm.
TEST- This function will run a self test program.
1. Press the MENU button until "TEST" is dis-
played, press ENTER.
2. The fixture will now run a self test. Press MENU
to exit.
VER - This function to check the software version
LOAD - This function will restore to the factory
setting
1. Press the MENU button until "LOAD" is dis-
played. Press the ENTER button and the unit
will restore to the factory setting.
English version | Tecshow Madbox Plus
P. 7