Preparation
This product includes a GLASS panel! Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts
and assembly steps are grouped for wall-hanging or recessing use. Check the parts list to make sure
nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape
measure; electric drill; 1/4" wood drill bit, hammer.
Parts and Hardware
A – Fireplace
E-Wall Bracket
Fixed on back of firebox
Specification and Dimension
F-Decorative
Crystals - Large
www.aflamo.com
B – Wood Screws
Remote Control
G-Decorative
Crystals -Small
Description
Type
Voltage
Watts
Amps
C – Drywall anchors
H - Drift Logs
Electric Fireplace
3 Way Mounting Unit
Wall-Mount, Recess into
Wall and
Assemble with mantel
220-240V AC
1400-1600W
10AMP Grounded Circuit
3