Remote Control Operation - aflamo ROYAL 42 Manual De Usuario

Remote Control Operation

BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
COLOR button: Makes the color flame
effect changing.
NOTE: color effect stays on until power
button is turned off. Color flame effect
must be on for heater to turn on.
FLAME button: Makes flame effect
dimmer and brighter.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
on for heater to turn on.
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
HEATER
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
FUNCTION
www.aflamo.com
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
1. Press once. Flame color effect gets
changing.
2. Press again until desired setting is
reached. In total 6 colors for flame.
1. Press once. Indicator light turns on.
Flame brightness effect gets changing.
2. Press again. until desired setting is
reached.
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
Press again. Indicator lights up.
2.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
11