Using The Appliance - Profi Care PC-HSM/R 3100 Manual De Instrucciones

4. Prior to the first use, charge the device for approx. 3 hours.
NOTE:
• During the charging process, the LED display (4) shows the current charge
status of the battery as a percentage.
• If the rechargeable battery is empty, the appliance can be operated via mains
power. In order to do so, connect the power adapter directly to the appliance.
During mains operation, the LED display shows the current charge status of
the battery as a percentage.
5. Stop all further charges after approx. 3 hours.
CAUTION:
After charging for approx. 3 hours, always disconnect from the mains power supply.
Switching On and Off
Slide the on / off switch (1) to position I to switch on the appliance or to position 0 to
switch off the appliance.
Adjust Cutting Length
1. Turn off the appliance. The on / off switch (1) is set to the position 0.
2. Select a comb attachment (6). Each comb is marked with its cutting length.
3. Attach the comb attachment as shown in fig.
the shaving head (3) into the serrations on the comb attachment. Press the comb
attachment firmly onto the shaving head. It must audibly snap into place.
4. To remove the comb attachment, press the latching nose out of its lock and pull
the comb attachment upwards and off.
Cut Hair and Beard
WARNING: Risk of Injury!
Do not press the shaving head of the appliance too firmly against the skin.
NOTE:
• Only cut dry hair with this appliance.
PC-HSMR3100_IM - 01.2022
Using the Appliance
on page 3. Slide the blades of
77
07.01.22