Connecting A Headset - Doro HearPlus 317ci Manual Del Usuario

Hands free function
1.
Press . The hands free function will be activated and the
LED indicator next to the button will illuminate.
2.
Dial the required telephone number. Adjust the volume using
the volume control located on the side of the telephone.
3.
Press to terminate the call.
Please note!
If you wish, you can switch between handset and hands free
mode by simply pressing
remember that in hands free mode it is only possible for one
person at a time to talk.

Connecting a headset

You can connect a headset to the
left side. When a headset is connected the speaker buttons
are used to connect /disconnect a telephone call (equivalent
to lifting and putting down the handset). The volume in the
headset can be adjusted, see previous page.
Please note!
On delivery, the telephone is set for speaker function.
Select headset function by setting the switch
the battery cover on the underside of the telephone to
Technical Information).
A neck loop/extra handset can be connected to this socket
instead of a headset.
DORO original headsets are tested and adapted for this model.
Other types and makes of headsets may be used, though the
function and sound quality cannot be guaranteed. In the worst
case, these could damage the headset and telephone. This
type of damage is not covered by the telephone's guarantee.
Hearing loop
The handset has a built-in hearing loop for those who wish to
use their hearing aids while using the telephone. Select the T
mode on your hearing aid to enable this feature.
English
All manuals and user guides at all-guides.com
or lifting the handset. Please

socket on the telephone's
� /
/
behind
(see