Product Overview; Intended Use - Hilti SC 4WL-22 Manual De Instrucciones Original

▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 31
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1

Product overview

3.2

Intended use

The product described is a cordless circular saw. It is designed for sawing wood or wood-like materials,
plastics, drywall panel, gypsum fiber board and composite materials.
The circular saw has a hose connector for sawdust extraction that is designed for common types of vacuum
cleaner hose. A suitable adapter might be required for connecting the dust-extractor hose to the saw.
▶ Use only saw blades approved for the product that comply with the specifications set out in the technical
data (e.g. diameter, speed of rotation, thickness, material, etc...). Grinding and cut-off wheels and saw
blades made of highly alloyed high speed steel (HSS) are not permissible.
▶ Saw only flat workpieces that offer a big enough contact surface to accommodate the whole of the base
plate.
▶ Do not use this product to cut metals, materials containing metal, mineral materials, brick and materials
containing quartz.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For this product, Hilti
recommends the use of the batteries stated in the table at the end of these operating instructions.
24 English
1
Auxiliary grip
@
Switch-on interlock
;
On/off switch
=
Grip
%
Guard
&
Battery release button
(
Battery status indicator
)
Battery
+
Hose connector for sawdust extraction
§
Pivoting guard operating lever
/
Arbor
:
Base plate
∙
Pivoting guard
$
Fence
£
Direction-of-rotation arrow
|
Clamping lever for cutting angle adjustment
¡
Cutting angle scale
Q
Cutting depth scale
W
Spindle lock button
E
0° cutting line indicator
R
45° cutting line indicator
T
Clamping screw for fence
Z
Hex key
U
Clamping lever for cutting depth adjustment
I
Mounting flange
O
Clamping flange
P
Clamping screw
Ü
2276127
*2276127*