Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
COLORado™ Batten 144 Tour QRG
About this Guide
Disclaimer
Safety Notes
Contact
What Is
Included
AC Power
All manuals and user guides at all-guides.com
The COLORado™ Batten 144 Tour Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and DMX
values. Download the User Manual from
more details.
The information and specifications contained in this QRG are subject to change
without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
DO NOT look at the light source when the product is on.
·
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
·
CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
·
CAUTION! This product's housing is hot when lights are operating.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
·
USE a safety cable when mounting this product overhead.
·
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
·
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
ONLY use the hanging/mounting bracket to carry this product.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor
to
request
www.chauvetprofessional.com
·
COLORado™ Batten 144 Tour
·
Power Input Cord
·
Glare Shield
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
www.chauvetprofessional.com
support
or
return
for contact information.
·
Warranty Card
·
Quick Reference Guide
2
EN
for
a
product.
Visit
Publicidad
Tabla de contenido
