Chauvet Professional COLORado Batten 144 Tour Guía De Referencia Rápida página 3

COLORado™ Batten 144 Tour QRG
Power Linking You can link up to 3 COLORado™ Batten 144 Tour products at 120 VAC or
5 at 230 VAC. Power linking cords can be purchased separately.
AC Plug
Fuse 1.
Replacement
2.
3.
4.
DMX Linking The COLORado™ Batten 144 Tour will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX The COLORado™ Batten 144 Tour uses a regular DMX data connection for its
DMX personalities: TOUR, BLOCK1, BLOCK2, ARC1, ARC1 + D, ARC3,
Connection
ARC3 + D, ARC3 + S, and HSV. See the User Manual to connect and configure
for DMX operation.
Master/Slave The COLORado™ Batten 144 Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Connection
Master/Slave operation.
Mounting Before mounting this product, read the
clamp is capable of supporting the weight of the product. For our Chauvet line of
mounting clamps, go to
clamps/.
Product
Mounting
Diagram
All manuals and user guides at all-guides.com
Connection Wire (U.S.)
AC Live Black
AC Neutral White
AC Ground Green/Yellow
Disconnect the product.
With a Phillips #2 head screwdriver, unscrew the fuse holder cap.
Remove the blown fuse and replace it with a good fuse of the same type
and rating.
Screw the fuse holder cap back in its place and reconnect power.
Overhead Mounting
3
Wire (Europe)
Brown
Blue
Green/Yellow
Safety Notes. Make sure the mounting
trusst.com/productcategory/base-plates-accessories-
Mounting Clamp
Floor Mounting
EN
Screw Color
Yellow/Brass
Silver
Green
Safety Cable