All manuals and user guides at all-guides.com
Instruction Manual
Read the "Safety Instructions" on page 17 and the
following before using the tool.
Additional Safety Rules
1. Be aware that this tool is always in an operating condi-
tion, since it does not have to be plugged into an electrical
outlet.
2. When drilling into walls, ceilings, etc., "live" electrical
wires may be encountered. DO NOT TOUCH THE
CHUCK OR ANY FRONT METAL PARTS OF THE
TOOL! Hold the tool only by the plastic handle to prevent
electric shock in case you drill into a "live" wire.
3. If the bit becomes jammed, immediately turn the main
switch off to prevent an overload which can damage the
battery pack or motor. Use reverse motion to loosen
jammed bits.
4. During charging, the charger may become slightly warm.
This is normal. Do not leave the battery in the charger for
more than 24 hours after charging is completed.
5. Use only a dry, soft cloth for wiping the unit. Do not use a
damp cloth, thinner, benzine, or other volatile solvents for
cleaning.
6. The appliance is not intended for use by young children
or infirm persons without supervision.
7. Young children should be supervised to ensure that they
do not play with the appliance.
22
PHOENIX CONTACT
102553_00_ia