Phoenix Contact ASD 21 Manual página 42

All manuals and user guides at all-guides.com
D Speed Selector Switch
To suit the application of this tool, two different rotational
speeds are available. Depending upon use, either the high or
low speed should be selected.
LOW 200/min (RPM)
HIGH 600/min (RPM)
CAUTION: Check rotational speed selection before
operating this tool (Figure 5).
High
Figure 5 Speed selector switch
E Main Switch Lock
After use, set the main switch lock at the lock position to pre-
vent accidental operation.
Main switch
lock
Figure 6 Main switch lock
F Battery Pack
• Press the battery pack release buttons G on both sides
and pull the pack away from the tool.
• Charge the battery pack using the battery charger.
• After the charging has been completed, remove the bat-
tery pack from the charger and connect it to the tool. Dis-
connect the charger form the power source when not in
use (Figure 7).
26
PHOENIX CONTACT
Strong torque
Less torque
Low
Lock
102553_00_ia