Phoenix Contact ASD 21 Manual página 40

All manuals and user guides at all-guides.com
B Clutch Handle (Clutch Torque Setting)
Adjust the torque to one of the 21 possible settings to the job.
There is an interval of about 0.13 Nm (1.3 kg-cm or 1.1 in-lbs)
between steps.
CAUTION! Test the setting before actual operation.
Set the scale at this line.
Figure 2 Clutch torque setting
Scale Torque
Approx. 0.29 Nm
1
(3.0 kgf-cm or 2.6 in-lbs)
Approx. 0.82 Nm
5
(8.4kgf-cm or 7.3 in-lbs)
Approx. 1.35 Nm
9
(13.8 kgf-cm or 12.0 in-lbs)
Approx. 1.88 Nm
13
(19.2 kgf-cm or 16.6 in-lbs)
Approx. 2.41Nm
17
(24.6 kgf-cm or 21.3 in-lbs)
Approx. 2.94Nm
21
(30.0 kgf-cm or 26.0 in-lbs)
Approx. 4.4Nm
(45.0 kgf-cm or 39.0 in-lbs)
• When use at high speeds, set the scale at 10 or below.
(Operation stops at the maximum torque 1.5Nm (15kgf-
cm), when the scale is higher.)
• The auto shut off function may become inoperable at use
at higher scales when battery power drops. Recharge the
battery in that case.
24
PHOENIX CONTACT
Use
For driving screws
For powerful driving
screws and drilling
102553_00_ia