Fast Start Quick Reference Guide; Spraying Instructions; Cleaning Instructions - Homeright Super Finish Max Manual De Instrucciones

FAST START QUICK REFERENCE GUIDE

SKIN INJECTION HAZARD RISK OF EXPLOSION OR FIRE HAZARDOUS VAPORS
Read all warnings and safety instructions in the owner's manual before use.

Spraying Instructions

1
1. Thin material as necessary.
(See page 5.) Remove and fill
container with material. Use a
filter to strain material if it is old.
5
5. Attach container to sprayer.
9
HAZARDOUS VAPORS
9. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
This is only a quick reference.
Read the entire instruction manual prior to using the product.
2
2. Determine size of tip and needle
you will need by referring to
chart on page 5.
6
See manual for grounding
instructions
6. Plug sprayer into outlet.

Cleaning Instructions

1
1. Unplug sprayer, remove
container, and empty contents.
SUPER FINISH MAX SPRAYER
® (C800971)
3
Black
Yellow
3. Select the proper Air Cap.
Black: Fine spray pattern.
Yellow: Wide spray pattern
7
7. Adjust spray pattern to horizontal,
vertical, or cone. (See page 7.)
2
2. Fill sprayer with cleaning
solution, plug in sprayer, and
operate trigger until solution
comes through nozzle. Do not
submerge in liquid.
4
4
4. Insert the pick-up tube into the
cylinder housing. See Page 6,
Figure B to determine orientation
of pick-up tube.
8
8. (–) Turn counter clockwise for
less flow and finer spray pattern.
(+) Turn clockwise for more flow
and larger spray pattern.
3
3. Remove parts. Clean and dry
thoroughly according to Step
Two of the Clean Up instructions.
(See page 8.)
ENGLISH