Manual Handling; About Manual Handling; Auto Mode; Adjusted Auto Mode - Boneco H300 Manual

MANUAL HANDLING

ABOUT MANUAL HANDLING

Manual handling works conveniently by the knob
on the front side. The BONECO app off ers additional
extensive options for control and automation of the
BONECO appliance.

AUTO MODE

If you have never operated the BONECO appliance
with the BONECO app and switch it on for the fi rst
time, it starts up in AUTO mode. The appliance is pre-
set to a target relative humidity of 50 percent. The
performance level is automatically adapted to the
current humidity: The drier the air, the higher the
performance level.
If the preset target humidity is exceeded, the appli-
ance switches to standby mode, which is indicated
by the pulsing LED:
If the humidity drops below the set level, the appli-
ance resumes operation.

ADJUSTED AUTO MODE

If you have already operated the appliance with the
BONECO app and set a diff erent humidity, that value
is automatically taken over when the appliance is
switched on.

SWITCHING ON AND OFF

1. Briefl y press the knob once to switch on the ap-
pliance.
The appliance is always in AUTO mode when it is
switched on. You can identify active AUTO mode by
the small LED that lights up above the knob.
2. To switch off the appliance while it is in AUTO
mode, briefl y press the knob once.
37
en