Use Instructions; Important Parts - DeVilbiss 9100D Guía De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I m p o r t a n t P a r t s
CAUTION–Federal (U.S.A.) law restricts this device
to sale by or on the order of a physician.
This humidifier is intended for single-patient
use only. The humidifier may be cleaned and
reused by the same person. It must not be
used by more than one person.
USE INSTRUCTIONS (FOR SINGLE-PATIENT USE)
This product is intended to be used with continuous
positive airway pressure (CPAP), some auto-adjusting
CPAP devices, bilevel systems and non-invasive
ventilation devices for the treatment of Obstructive
Sleep Apnea (OSA).
This product is not recommended for use with
auto-adjusting CPAP systems that use snoring for
pressure adjustment. The humidifier is known to
attenuate snoring, which prevents the auto-
adjusting CPAP from detecting most snoring.
This product should not be used with any
external heat source not recommended by
Sunrise Medical.
IMPORTANT PARTS OF YOUR HUMIDIFIER
The DeVilbiss Humidifier consists of the following parts
(Figure 1):
1. Chamber Lid
2. Chamber Base
3. O-Ring Seal (Shown assembled in chamber base)
4. Slide Latch (6 latches)
5. 15"(38 cm)22 mm diameter connector tubing
The DeVilbiss Humidifier is supplied fully assembled.
After removing the humidifier and tubing from the
packaging, inspect the chamber, o-ring seal and
tubing for damage before using. Prior to first use, the
humidifier should be washed, using the "Care and
Cleaning Instructions" on page 6.
All manuals and user guides at all-guides.com
4
3
1
2
5
Figure 1
3
A-9100

Publicidad

Tabla de contenido
loading

Tabla de contenido