Set-Up Before Use; Telescopic Pole (Not Included) Assembly; Specific Telescopic Pole (Not Included) Assembly - W'eau EV75 Manual De Usuario

Set-Up Before Use

Telescopic pole (not included) assembly

(For EU & USA only)
Press down the side pins of the connector and slide the telescopic pole to the
connector until both side pins secured in the holes of the pole. Press down the top pin
of the connector and insert it into the connector chamber until top pin is secured in the
hole.
To release the telescopic pole, press down the top pin of the pole connector and pull out
the pole. Press down side pins of the connector to release the pole.

Specific Telescopic pole (not included) assembly

(For Australia and New Zealand only)
Insert the end (with two side pins) of the specific telescopic pole connector into the pool
vacuum as shown until its side pins are secured to the handle's locking hole on the rear
body. Install the specific telescopic pole (with internal wishbone clip) to the pole
connector as shown:
12