Cleaning The Filter - W'eau EV75 Manual De Usuario

Ensure the charging cable is detached and the charging port is plugged

with the protective cap before the pool vacuum is deployed.
1) Bring your pool vacuum to the side of your pool / spa. Immerse the pool vacuum in
water and turn the power switching knob clockwise to initiate operation.
Power indicator lights:
CAUTION! Make sure the pool vacuum is always facing downwards when it is placed
into the pool. Otherwise, it may bend the pole connector and damage it during the
process.
2) To remove the pool vacuum from the pool / spa, lift the pool vacuum while pointing it
downwards. Water is going to escape via the pole, draining valve on the canister and
bottom of the pool vacuum. Turn the pool vacuum to have the draining valve face to
the pool to drain the water.
CAUTION! Make sure the pool vacuum is always facing downwards when it is removed
from the pool. Otherwise, the pole connector may be bent and damage the pool vacuum
in the process.
3) Rinse the pool vacuum with fresh water after every use. DO NOT use any detergent.

CLEANING THE FILTER

WARNING!
Using the pool vacuum without a filter cone in place will
VOID your warranty.
In order to maximize the cleaning efficiency, be sure to clean the cartridge filter/filter cone
before and after each use.
4 lights ON
Last light blinks
Up to 75 minutes left
Only 10-15 minutes of usage
remains once the last light
starts blinking.
15