Important Safeguards - Tristar PZ-2963 Manual De Usuario

Ocultar thumbs Ver también para PZ-2963:
Tabla de contenido

Publicidad

Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
Before first use
Wash the lid (No. 2) thoroughly with hot water, use some detergent if required.
Attach the handle (No. 3) on the cover with the supplied screw.
Clean the inside of the pan (No. 4) with a damp cloth and dry them well.
Never immerse the appliance in water!
At the first use the appliance can spread some smell and smoke, this is normal.
Always place the device in a well ventilated area and on a stable surface.
Use
Insert the supplied thermostat in the connection of the thermostat (No. 1).
Use
With the control knob of the thermostat you can set the desired temperature.
Position
0
OFF
1
110° C
2
150° C
3
200° C
4
230° C
5
280° C
The thermostat regulates a constant temperature. During baking, the temperature light turns
on and out, this is normal, the set temperature is constantly adjusted.
Set the desired position and add some olive oil or butter in the pan, place your ingredients and
put the lid on the pan. The cooking time depends on the ingredients and the selected
temperature.
The pan is extremely suitable as a snack pan for all kinds of dishes and for preparing pizza's.
Never use sharp objects in the pan, it will damage the non-stick layer.
Cleaning of the device
Remove before cleaning the power cord from the wall outlet and wait until the device is fully
cooled down. Never pour cold water in the pan to the earlier cooling, this can damage the
device and can cause splashing hot water.
Clean the pan with a mild detergent and a damp cloth
Never use harsh and abrasive cleaners, steel wool or a sanding sponge, which could damage
the non-stick layer. Never immerse the device in water or other liquid. The pan is not
dishwasher safe.
All manuals and user guides at all-guides.com
UK
For a lower position turn
the knob to the right
.
7

IMPORTANT SAFEGUARDS

Read all instructions before use.
Do not touch hot surfaces. Use handles or knobs.
To protect against electric shock, do not immerse cord, plug or appliance in water or
any other liquid.
Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.
The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.
Do not use outdoors, or on or near direct heat sources
Do not let cord hang over edge of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.
This appliance is for household use only and only for the purpose it is made for.
The appliance must be placed on a stable, level surface.
This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
This device is not intended for use with an external timer or a remote control system.
Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
A damaged cord or plug must be replaced by an authorized technician to avoid a
hazard. Do not repair the device yourself.
Using an extension cord or something similar is not allowed.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
8

Publicidad

Tabla de contenido
loading

Tabla de contenido