Before Using The Appliance For The First Time; Preparing Popcorn - Unold 48556 Instrucciones De Uso

30. Unplug the mains plug from the
electrical outlet after use and
before cleaning. Never leave the
appliance unattended when the
mains plug is plugged in.
CAUTION:
The appliance is very hot during and after operation!
Never place hand in machine when in operation – risk of injury!
Never open the housing of the appliance. This can result in electric
shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or
incorrect use or if repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

1. Remove all packaging materials
and any transport safety devices.
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. Check if the appliance is placed
firmly.
4. Connect the base to the mains
supply by means of the lead cable
(230 V~, 50 Hz).
5. Preheat the appliance for some
minutes on highest level before

PREPARING POPCORN

Do not use microwave popcorn.
The maximum fill quantity per batch is 100 g of corn kernels. Do not overfill the
appliance, if you do so the corn kernels on the bottom can scorch and smoke can
form. Ensure that you use a sufficient quantity of corn kernels, if you do not fe-
wer kernels will pop and there will be more hard corn kernels among the popcorn.
1. Set the mixer (3) on the axle and
fix it clock-wise with the screw
(2).
2. Fill approx. 100 g of corn kernels
into the bowl. The bottom should
be covered to 75 %. Do not use
more kernels at a time. If the
popping chamber is overfilled the
appliance might get blocked.
3. Add approx. 2 tablespoons of oil
as well as salt or sugar to taste.
All manuals and user guides at all-guides.com
31. Allow the appliance to cool before
32. Never immerse the motor block in
4.
5.
6.
7.
cleaning it.
water, if you do so the motor block
can be damaged.
using it for the first time to remove
eventual production
on the plates. Open the window
during this heating period. Let
the appliance cool down after the
initial heating. After the initial
heating you see some use tracks,
however, these will not affect the
function of the appliances and are
no reason for complaints.
Do not add other spices, they
might burn.
Put the lid (1) on the motor block
(4).
Put the plug into a power socket.
Set the timer to the maximum
time.
The appliance starts to heat and
the corn begins to pop up. The
mixer ensures a uniform mixing
of popped and unpopped kernels
residues
15