Maintenance; Impeller Replacement; Fuse Replacement - Everbilt ZE00804 Manual Del Usuario

Maintenance

When you have finished pumping, disconnect the wires from the power source to be sure the unit is turned off.
NOTE: Use the supplied suction strainer. Keep the pump inlet clear.

Impeller Replacement

Remove the impeller cover screws (4).

Remove the impeller cover (3).

Inspect the O-ring (1) and impeller (2). If the impeller wears out, replace the impeller.

NOTE: Do not disassemble the motor housing of the pump. This motor has NO repairable internal parts, and disassembling may cause a
dangerous electrical wiring issue.

Fuse Replacement

1. Gently press the two fuse holders and turn the fuse holder counterclockwise to release them.
2. Push the new fuse firmly up into the fuse holder.
3. Gently press the two fuse holders and turn the fuse holder clockwise to reassemble.
Item Description
1 O-ring
2 Impeller
3 Impeller Cover
4 Screw
8
Qty
1
1
1
6