Care And Cleaning; Additional Maintenance Guidelines; Service Parts - Everbilt HDS30 Guía De Uso Y Cuidado

Care and Cleaning

WARNING: Ensure the pump is disconnected from the
power source before attempting to service or remove any
component.
WARNING: Do not remove the impeller. Removal of the
impeller requires special tools and can only be performed
by an authorized service center.
To clear a pump that is clogged with debris:
□
Unplug the pump to disconnect the electrical power.
□
Unscrew the six screws (1) on the pump body and take
the rubber belt (4) down from the volute (2).
□
Remove the volute (2).
□
Remove debris from around the impeller (3).
□
Reassemble the pump.

ADDITIONAL MAINTENANCE GUIDELINES

□
This unit is permanently lubricated. Oiling is not required.
Do not, in any case, open the sealed portion of the unit or
remove the housing screws.
□
Periodic cleaning of the pump parts will prolong the LIFE
and EFFICIENCY of the pump. Refer to the assembly and
disassembly of the pumping head.
□
Ensure the power cord is in good condition and contains
no nicks or cuts.

Service Parts

Number Description
Volute-HDS30
1
Volute-HDS50
2 Float w/the rubber belt
Part Number Quantity
HDS3001 1
HDS5001 1
HDS3002 1
4
8
3
2
1