Program Guide - ITS EK HDT2 Manual

EN
FAV
- Select a channel and press 5 button on the remote control. Then
press OK. A favorite list will be displayed.
· Choose one of the lists and press OK. Then press EXIT button to confirm changes.
The selected channel will be saved in that list (it is now marked with an icon).
. Use left and right buttons on the remote control to switch between channel lists..
To delete channel from the favorite list, select the channel, press 5 button and then
press OK. Favorite channel list will be displayed. Press OK button again.Then, you
can exit menu to confirm the changes. The channel will be deleted from the favorite
list.

PROGRAM GUIDE:

1. Enter EPG,press GREEN button to check Day- channels guide and press YELLOW to
check Day+ channels guide.
2. Or press EPG button on the remote control to enter Electronic Program Guide.
3. Use Up and down buttons on the remote control to navigate the program.
4. Choose program you want,press right button on the remote control and use up
and down buttons of RCU to choose channels at different time period.Press OK to
check channels detailed information.
5. Press red button to do a timer to watch selected channels in time,press exit button
to save the schedule,the channels will be marked with a green dot icon.
SORT:
You can sort the channels by LCN/By TP/By service ID/By service Name
LCN: ON/OFF
LCN (Logical Channel Number): Choose if you want to sort the channels according
to their logical channel number.
Volume scope: Global/Channel.
If global,volume control will be applied to each channels.
If Channel,volume control will be applied to current channel.
PICTURE
ASPECT RATIO:
Available options: Auto,16:9 wide screen,16:9 pillar box,16:9 pan scan,4:3 letter
box,4:3 pan scan,4:3 full.4:3PS, 4:3LB or . The default value is Auto.
Resolution/TV format: Choose PAL,relative resolution will be 576i/720p/1080i/1080p.
Choose NTSC,relative resolution will be 480i/480p/720p/1080i/1080p.
OSD SETTING: