Safety Instructions - ITS EK HDT2 Manual

EN

SAFETY INSTRUCTIONS:

Carefully read the instruction manual before use and keep the manual for future
reference. The manufacturer shall not be held liable for damages owing to due to
an improper use of the device.
This symbol is to warn about existence of uninsulated dangerous
voltages in the product housing, which may pose a danger of elec-
trocution.
This symbol is to warn about the existence of important operating and
maintenance instructions (assistance) in the texts included in the
device.
1) Read these instructions
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
8) Operate this product only from the type of power source indicated on the
label. If you are not sure of the type of power connected to your home,
consult your local power company. Disconnect the unit from the mains before any
maintenance or installation procedure.
9) Protect the mains cord from damage and stress.
10) Only use attachments/accessories specified by the manufacturer.
11) Unplug this apparatus during lightning storms or when unused for long
periods of time.
12) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, including damage to the
mains cord or plug, if the unit has been exposed to liquid or moisture,has been
dropped or is not operating correctly.
13) Do not impede the air flow into the unit by blocking the ventilation slots.
ATTENTION
DANGER OF ELECTROCUTION
DO NOT OPEN