Inflating Tires; Layout And Items Supplied; Proper Use - EINHELL PRESSITO Bivolt Manual De Instrucciones Original

tions, damaged guards and parts have to be
repaired or replaced by a customer service
workshop. Damaged switches have to be
replaced by a customer service workshop.
Never use an electric power tool with a switch
that cannot be turned on and off.
•
Leave all repairs to a qualified electrician
Repairs must be left strictly to qualified elec-
tricians or the user might suffer an accident.
•
Noise
Wear ear muffs when you use the compres-
sor.
•
Replacing the power cable
To prevent hazards, leave the replacement of
damaged power cables strictly to the manu-
facturer or a qualified electrician. There is a
risk of electric shock!
•

Inflating tires

Directly after inflating tires, check the pressu-
re with a suitable pressure gauge, for examp-
le at your filling station.
•
Place of installation
Set up the compressor on an even surface.
Safety instructions for working with compressed
air and blow-out pistols
•
The air, which is sucked in by the compres-
sor, must be kept free of impurities that could
cause fires or explosions in the compressor
pump.
•
Wear safety goggles. Foreign bodies or blown
off parts can easily cause injuries.
•
Do not blow at people and do not clean
clothes while being worn. Risk of injury!

2. Layout and items supplied

2.1 Layout (Fig. 1-8)
1 Handle
2 Accessory storage compartment
3 Air hose
4 Air hose connection (blowing)
5 Compressed air hose with valve adapter
6 Battery pack (not supplied)
7 Bicycle adapter
8 Conical adapter
9 Adapter for ball valves
10 Selector switch for mains-powered mode/
battery-powered mode
11 Display
12 Selector switch for compressed air mode/
OFF/low-pressure blower mode
13 Air hose connection (suction)
Anl_SA_PRESSITO_Bivolt_SPK8.indb 36 Anl_SA_PRESSITO_Bivolt_SPK8.indb 36
GB
14 "Reduce pressure" button
15 "Unit overpressure" button
16 "Increase pressure" button
17 Storage compartment for the power cable
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Compressor
•
Air hose
•
Bicycle adapter
•
Conical adapter
•
Adapter for ball valves
•
Original operating instructions

3. Proper use

This device is intended for infl ating car, motorcyc-
le and bicycle tires as well as sports balls, water
balls, air mattresses and other similar items.
In addition the device is also intended for suctio-
ning volumes of air from objects with low pressu-
re, such as water balls, air mattresses and other
similar items.
This device is not suitable for tires with very large
volumes, such as truck or tractor tires for examp-
le.
The equipment can be operated from the mains
power supply using the power cable or alterna-
- 36 -
15.10.2018 10:59:20 15.10.2018 10:59:20