Setting Up Your Camera; Install The Battery; Charge The Battery - HP Photosmart R827 Manual Del Usuario

2

Install the battery

1. Open the Battery/Memory card
2. Insert the battery in the larger slot,
3. Close the Battery/Memory card
Note
Fully charge the battery before using it the first time.

Charge the battery

You can charge the battery in
the camera, using the AC
adapter.
1. Plug the small end of the
2. Attach the thin cord from the AC power adapter to
The camera's blinking Battery Charging light indicates
that the battery is charging; the battery is fully charged
when the light stays on solid (approximately 2–3 hours).

Setting up your camera

Downloaded From camera-usermanual.com HP Manuals
All manuals and user guides at all-guides.com
Setting up your
camera
door by sliding the door latch as
indicated on the Battery/Memory
card door.
pushing the battery in until the
latch catches.
door.
Turn the camera off before removing the battery.
power cord into the AC
power adapter, and the
large end into an electrical
outlet.
the camera as shown.
9