Setting Up Your Camera; Install The Batteries - HP Photosmart E327 Guía De Comienzo Rápido

E327_ChengHo_QSG.fm Page 8 Friday, November 4, 2005 3:19 PM

2 Setting up your camera

Install the batteries

1. Open the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card.
NOTE: Turn the camera off before removing
the batteries. If using rechargeable NiMH
batteries, make sure they are fully charged
before using them the first time.
Camera usage and battery type will affect
battery life. For complete information, see
Appendix A in the electronic User Guide.
Number of shots
Battery type Minimum
High Drain 70
Alkaline
NiMH 110
Lithium 260
8
HP Photosmart E327 Quick Start Guide
Maximum Average
120 100
280 190
490 340