Setting Up Your Camera; Install The Batteries - HP Photosmart M425 Manual De Instrucciones

2
Setting up your
camera

Install the batteries

1. Open the Battery/Memory card door
by sliding the door latch as indicated
on the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card door.
Note Turn the camera off before
removing the batteries. If using
rechargeable NiMH batteries, fully charge
the batteries before using them the first time.
Camera usage and battery type will affect
battery life. Alkaline batteries provide far less
battery life than either Photo Lithium or NiMH
batteries. For complete information, see Appendix A in
the electronic User Guide.
Battery Minimum
type
Alkaline 77
NiMH 215
Photo 365
Lithium
The CIPA number is obtained using the standards
established by the Camera and Imaging Products
Association.
10 HP Photosmart M425/M525 Digital Camera
Number of shots
Maximum Average
180 120
380 290
600 485
CIPA
80
205
423