Setting Up Your Camera; Install The Batteries; Turn On The Camera - HP Photosmart M437 Manual Del Usuario

2
Setting up your
camera

Install the batteries

1. Open the Battery/Memory Card
door by sliding the door latch as
indicated on the Battery/Memory
Card door.
2. Insert the two AA batteries.
3. Close the Battery/Memory Card
door.
Note If using rechargeable NiMH batteries, fully
charge the batteries before using them the first time.
Turn the camera off before removing the batteries.
Camera usage and battery type will affect
battery life. Photo Lithium and NiMH batteries
provide longer battery life than Alkaline
batteries. For complete information, see Appendix A in
the electronic User Guide.
Actual battery life may vary based on usage.

Turn on the camera

To turn on the camera, press the
8 HP Photosmart M437/M537 Digital Camera
button.