Child Lock; Keep-Warm Function; Milk Function - Silvercrest SIKP 2000 F1 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SIKP 2000 F1
If necessary, you can adjust the power level or temperature using the + (10) and - (12) buttons.
Once the countdown reaches zero, the induction hotplate automatically switches off. A beeper sounds.
In order to switch the induction hotplate off manually before the time has elapsed, press the
On/Off button

7.5 Child lock

The induction hotplate has a child lock so that the settings cannot be changed accidentally.
How to activate or deactivate the child lock:
1. Press the + (10) and - (12) buttons together briefly. An acoustic signal can be heard and the
indicator (19) lights up. The child lock is now activated.
2. Press and hold the + (10) and - (12) buttons for about 3 seconds. An acoustic signal can be heard
and the indicator (19) light goes out. The child lock is now deactivated again. You can use the
induction hotplate as normal.
 You can also activate the child lock when the induction hotplate is switched off.
 If you activate the child lock while the induction hotplate is on, it can still be switched off.
But all other functions are blocked.

7.6 Keep-warm function

You can keep food warm for up to 2 hours at approx. 60 °C using the keep-warm function.
How to use the keep-warm function:
1. While the induction hob is running, press the button for the keep-warm function
(11) then alternates between showing "60" and the remaining keep-warm time (starting at "120"
minutes). The keep-warm function indicator (5) lights up. While the remaining keep-warm time is
shown, the indicator (16) is lit up at the same time.
 If necessary, you can use the boost function at the same time (see below). After the heating
time of 30 seconds at full power, the device automatically switches back to the keep-warm
function.
 The milk function cannot be combined with the keep-warm function.
 While the keep-warm function is activated, press the function button
keep-warm function and continue at power level L05.

7.7 Milk function

The milk function is used to warm milk without it burning or boiling over. The milk gets to a temperature of
60 °C and is kept warm for 20 minutes.
50 - English
(7).
(8). The display
(9) to cancel the