Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Symbol
Equipment protected throughout by DOUBLE INSULATION or REINFORCED
Conforms to UL STD 61010-1, 61010-2-032, 61010-2-033, Certified to CSA
CAT II
It is applicable to test and measuring circuits connected to the distribution
CAT III
- Max LCD display counts: 4099.
- Polarity display: Auto
- Overload display: "OL" or "- OL"
- Low battery indication: "
Low battery shutdown prompt: The "Lo.bt" interface appears on LCD and lasts for about
10s, the buzzer beeps 3 times, and the meter automatically shuts down.
Test position error: If the source under test is not placed at the center of the clamp jaws
when measuring current, ±1.0% additional error in reading may be produced.
- Drop protection: 1m
- The maximum size of jaw opening: 28mm in diameter Battery: AAA 1.5V battery × 2
- Auto power off (adjustable): The meter will auto power off if there is no operation for 15
min.
- Dimensions: 215mm × 63.5mm × 36mm Weight: About 235g (including batteries) Altitude:
2000m
- Operating temperature and humidity: 0°C~30°C (≤80%RH), 30°C~40°C (≤75%RH),
40°C~50°C (≤45%RH)
16
Caution, possibility of electric shock
STD C22.2 No. 61010-1, 61010-2-032, 61010-2-033.
It is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage
part of the building's low-voltage MAINS installation.
GENERAL SPECIFICATIONS
" means low battery
SYMBOLS
Description
Alternating current
Direct current
INSULATION
Earth (ground) TERMINAL
Warning or Caution
MAINS installation.
Publicidad
Tabla de contenido
