Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
- Open circuit voltage is about 1V
- Overload protection: 600Vrms
Capacitance Measurement
Range
40.00nF
400.0nF
4.000uF
40.00uF
400.0uF
4.000mF
40.00mF
Caution:
- Measured resistance value = displayed value – resistance value of short circuited test
leads
- Open circuit voltage is about 1V
- Overload protection: 600Vrms
Frequency Measurement
Range
10Hz～10MHz
Caution:
Measurement sensitivity:
≤100kHz: 200mVrms≤ input range≤30Vrms;
>100kHz~1MHz: 600mVrms≤ input range≤30Vrms;
>1MHz~10MHz: 1Vrms≤ input range≤30Vrms
Duty ratio is only applicable to ≤10kHz square wave measurement with a range of 1Vp-p:
If frequency≤1kHz, duty cycle will be 10.0%-95.0%; If frequency>1kHz, duty cycle will be
30.0%-70.0%.
Warning: Before opening the rear cover of meter , remove test leads to avoid electric shock.
General Maintenance
Clean the meter casing with a soft cloth and mild detergent. Do not use abrasives or
solvents!
Do not use the tester or test leads if they appear to have any abnormality.
The maintenance and service must be implemented by qualified professionals or
designated departments.
24
Resolution
0.01nF
0.1nF
0.001μF
0.01μF
0.1μF
0.001mF
0.01mF
Resolution
0.01Hz～0.01MHz
MAINTENANCE
Accuracy
±(4%+5)
±10%
Accuracy
±(0.1%+4)
Publicidad
Tabla de contenido
