Adjusting Other Machine Settings; Restoring Factory Settings; Removing And Inserting The Brew Group; Removing The Brew Group From The Machine - Philips 4300 Serie Manual Del Usuario

English
14
You can only adjust the grind settings when the machine is grinding coffee beans. You need to brew 2 to
3 drinks before you can taste the full difference.
Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the coffee bean hopper.
3 Tap the espresso icon and then press the start/stop
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right. (Fig.
26)

Adjusting other machine settings

By tapping the Settings
-
Water hardness: you can select between 5 levels according to the water hardness in your region;
-
Profile activation: You can activate or de-activate any colored user profiles.
Note: at least one colored profile has to be always active.
-
Standby time: you can select 15, 30, 60 or 180 min
-
Display brightness: you can select low, medium and high.
-
Language
-
Sound: you can activate or deactivate the beeping sound of the machine
-
Temperature: you can choose between 3 brewing temperatures for your coffee
-
Front illumination (specific types only): you can choose 'always on', 'on during brewing' or 'always off'.
-
Measuring unit: you can choose between ml. or oz.

Restoring factory settings

The machine offers you the possibility to restore the factory settings at any moment.
1 Tap the Settings
2 Use the up and down icons to select 'Factory settings'. Confirm by tapping the OK icon.
3 Press the start/stop
-
The settings are now being restored.
The following factory settings are restored to default: water hardness, standby time, display brightness,
sound, temperature, front illumination, profiles.

Removing and inserting the brew group

Go to www.philips.com/coffee-care for detailed video instructions on how to remove, insert and clean the
brew group.

Removing the brew group from the machine

1 Switch off the machine.
2 Remove the water tank and open the service door (Fig. 27).
3 Press the PUSH handle (Fig. 28) and pull at the grip of the brew group to remove it from the machine
(Fig. 29).
icon you can adjust the following machine settings:
icon.
button to confirm you want to restore the settings.
button.