Personalizing Drinks; Adjusting Coffee And Milk Volume; Adjusting Coffee Strength; Adjusting Grinder Settings - Philips 3100 Serie Manual Del Usario

English
18
2 EP3363, EP3362, EP3360, EP3559, EP3551 only: Press the MENU button. Select DRINKS,
confirm and scroll to select HOT WATER.
- EP3558, EP3550 only: Press the one-touch HOT WATER button to dispense hot water.
3 To stop dispensing hot water, press the OK button.

Personalizing drinks

Adjusting coffee and milk volume

You can adjust the volume of the drink brewed according to your taste and to the size of the
cups. We advise you to use glass cups or cups with a ceramic-coated rim.
1 To adjust the espresso volume, press and hold the ESPRESSO button until the display
shows the MEMO icon (Fig. 17).
- The machine enters the programming phase and starts to brew the selected drink.
2 When the cup contains the desired amount of espresso, press the OK button to stop
dispensing and to save the coffee volume. To stop dispensing without saving the coffee
volume, press the ' back' button.
- The tick on the display shows that the button is programmed: every time it is pressed,
the machine brews the set espresso volume.
Note: To set the volume of coffee, cappuccino, latte macchiato (EP3363, EP3362, EP3360,
EP3559, EP3551 only), follow the same procedure: press and hold the button of the drink and
press the OK button when the cup contains the desired amount of coffee or milk. Make sure
that the milk carafe is in place and that the milk spout is open.

Adjusting coffee strength

- To change the coffee strength, press the AROMA STRENGTH button.
- Each time you press the AROMA STRENGTH button, the machine selects a higher aroma
strength setting. There are 5 strengths, 1 is very mild and 5 is very strong. After setting 5,
setting 1 is selected again (Fig. 18).
- The display shows the chosen strength. After adjusting the coffee strength, the display
shows the main menu again and saves the chosen aroma strength when you brew a coffee.

Adjusting grinder settings

You can adjust the grinder settings with the grinder adjustment key integrated into the handle
of the multifunctional tool. At each setting selected, the ceramic coffee grinder guarantees a
perfectly even grind for every cup of coffee you brew. It preserves the full coffee aroma and
delivers the perfect taste to every cup.
1 Open the lid of the bean hopper.
2 Place the grinder adjustment key on the grinder adjustment knob (1). Push and turn to the
left or to the right (2) one notch at a time (Fig. 19).
- There are 5 different grinder settings you can choose from. The smaller the dot, the
stronger the coffee.