English
- HOT WATER
GENERAL INSTRUCTIONS
Place the appropriate container under the hot water dispenser
(14).
Dispensing with automatic dosing
Press one of the hot water dispending keys (12)
corresponding to the desired dose.
The programmed dose of hot water will pour from the dispenser
(14) and will stop automatically.
N.B. Dispensing may be stopped by pressing the HOT WATER
STOP key (35)
.
Pressing the HOT WATER STOP key (35)
the parameters set during the programming phase.
- STEAM
GENERAL INSTRUCTIONS
Fully immerse the steam dispenser tube (15) into the vessel
containing the beverage that needs to be heated.
Dispensing through the tap (13)
Turn the steam tap knob.
Wait until the beverage has reached the required
temperature.
Stop the steam dispenser by turning the knob of the steam tap
in the opposite direction.
Note: At the conclusion of each steam dispensing phase, clean
the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully activate
steam dispensing at least once.
Dispensing with the Turbosteam selector (45)
provided)
Machines equipped with the TURBOSTEAM (STOP STEAM)
dispensing system have the "stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
Select the type of milk you desire:
- using the buttons 45A
(frothed) or 45B
CAUTION: do not put any cloth on the cup-tray.
The machines have a cup tray (9) which can be used to store
the cups.
Only place cups and glasses used with the coffee machine
on the cup tray (9). No other objects must be placed on
the tray (9).
Thoroughly drain the cups before placing them on the tray
(9).
All manuals and user guides at all-guides.com
3. Dispensing of beverages
does not change
(when
(hot).
4. Cup tray
48
35
12
14
When the set temperature is reached, steam dispensing can
be stopped:
- automatically;
- manually, pressing buttons 45A
For more information on the function, please consult the
engineer's manual.
English
45A
45B
13
15
or 45B
again.
9