Ortotecsa G.18900 Manual De Uso Y Mantenimiento página 24

PRODUCT STORING

To extend the life of the product, you must unplug it and keep it disconnected from the outlet
when not be used for some periods of time.

Store in a dry place.

Allow to cool before storing.

No apilar y almacenar los objetos en la parte superior ...

Do not place heavy objects on it

This device do not requires maintenance or calibration, just cleaning.
CLEANING PRODUCT
Cleaning the infrared lamp should be performed with the unit cold and disconnected from the mains. It
should be done with a damp cloth and dry.
Do not use detergents or solvents.
Do not immerse in water for cleaning.
If the lamp or any of the component parts showing signs of moisture, should be allowed to dry before
connecting back to the Mains.
TROUBLESHOOTING GUIDE: Possible malfunction.
PROBLEM
Lamp doesn't switching-on
The lamp doesn't heat.
LABEL ON PRODUCT
2013-06
Ortotecsa,s.l. c/Peña de Francia,8, 28500 Arganda del Rey
, Madrid-España
Potencia W/Voltios V/Hercios Hz/Amperios A
Este equipo no debe ser eliminado como un residuo urbano al tratarse de un residuo eléctrico/electrónico.
Ortotecsa,s.l. C/Peña de Francia,8
Tlf.:+34918719132
USER AND MAINTENANCE MANUAL
SUGGESTION
Check that there is right voltage at the socket used.
G.18900 / G.18900/1- Press the switch to switch-ON.
G.18900-A / G.18900-A/1. Turn the timer to run.
Check that the bulb is not broken, previously disconnecting the unit
from the outlet.
If bulb broke, follow the instructions in the appropriate section of this
manual.
Check the conditions of the power cord.
If still remains the problema go to our authorized service.
Check condition of the bulb and insert correctly.
28500 Arganda del Rey (Madrid), España.

 
Fax: +34918719323 email:
Rev. 4. Date: Ag 28, 2020

info@ortotecsa.com www.ortotecsa.com
pag 8 of 15