Zyxel PLA-401 v3 Guia De Inicio Rapido página 5

Connect the PLA-401 v3 to a
Computer
1. Use an Ethernet cable to connect the ETHERNET port on the PLA-
401 v3 to the Ethernet port on your computer.
2. Plug the PLA-401 v3 into a power outlet.
3. The power (
be on or blinking.
4. When the PLA-401 v3 detects a connection to another PLA-401 v3
(or another HomePlug AV compatible powerline adapter), the
HomePlug (
If you are having trouble setting up your connections, make sure:
• Your outlets are working properly. Unplug the PLA-401 v3 and plug
in another electrical appliance that you know works.
• The Ethernet cables you are using are Category 5 or higher. Most
cables are labeled with their specifications.
• All Ethernet cables are securely connected.
All manuals and user guides at all-guides.com
) LED should be on and the Ethernet (
) LEDs turn on.
ENGLISH
) LED should
5